HomeRailMakers BlogAbout usContact
(949) 642-6506

Custom & production metal fabrication


A few of the Yachts & Boats we specialize in:

Life Line and Gate Stanchions

18" Single Life Line Stanchion

Our Life Line Stanchions come in 18", 24" and 30"with the upright welded at 90 degrees to the mounting plate. The 18" are for single life lines while the 24" and 30" can be had in both double and single line configurations. All stanchions use the "standard" trapezoid shaped mounting plate and have a 5/16" loop at the base for added strength. 24" and 30" stanchions have a 5 hole mount pattern for ¼" fasteners. The 24" and 30" have a second piece of stainless steel inside the tube that extends approximately 5" above the 5/16’ loop to give the stanchion greater strength in this critical area. The "ferrules" for the life line to pass through the upright are pressed in stainless steel tubes with the shoulder rolled over and polished to remove sharp edges. The stanchions are electro-polished after fabrication.

Contact us for details

Click on picture to enlarge

24"- 30" Double Life Line Stanchion

Our Life Line Stanchions come in 18", 24" and 30"with the upright welded at 90 degrees to the mounting plate. The 18" are for single life lines while the 24" and 30" can be had in both double and single line configurations. All stanchions use the "standard" trapezoid shaped mounting plate and have a 5/16" loop at the base for added strength. 24" and 30" stanchions have a 5 hole mount pattern for ¼" fasteners. The 24" and 30" have a second piece of stainless steel inside the tube that extends approximately 5" above the 5/16’ loop to give the stanchion greater strength in this critical area. The "ferrules" for the life line to pass through the upright are pressed in stainless steel tubes with the shoulder rolled over and polished to remove sharp edges. The stanchions are electro-polished after fabrication.

Contact us for details

Click on picture to enlarge

Life Line Gates

Our Standard Life Line Gates are 24" and 30" made like the stanchions. The distance center to center between the mount plates is 12" for the 24" gate and 14" for the 30" gate. The gate brace is welded to the up right below the upper life line ferrule. The brace uses the 2 7/8" round three hole mounting plate. The 24" life lines are 12" center to center and the 30" are 15" center to center.

Contact us for details

Click on picture to enlarge
HomeAbout UsYachtsProductsArchitectural RailingsWademade ArtFAQ's

Custom & production metal fabrication

Railmakers, Inc. 864 W 18TH Street, Costa Mesa, CA 92627

(949) 642-6506

Contact Custom Orders
© Copyright 2010-2014 Railmakers Incorporated (all rights reserved)Web design and hosting by YourHost.com